Precut 1.05" OD Distributor Tube for 54" Mineral Tanks

This precut 1.05" OD distributor tube is prepared for standard 54" mineral-tank water softeners, backwashing filters, and other residential or light commercial water-treatment systems.

The distributor tube creates the internal flow path between the control valve and the lower distributor inside the mineral tank. It directs water through the treatment media during normal service, backwash, rinse, and regeneration cycles.

Its industry-standard 1.05" outside diameter is compatible with many Clack, Fleck, Autotrol, and other control valves equipped with a 1.05" distributor pilot. Precut sizing reduces installation time and eliminates the need to measure and cut standard tubing during system assembly.

Key Specifications

Product Type: Precut distributor tube or riser tube

Outside Diameter: 1.05"

Tank Compatibility: Standard 54" tall mineral tanks

Application: Water softeners and backwashing filtration systems

Valve Compatibility: Many Clack, Fleck, Autotrol, and other valves designed for a 1.05" OD distributor tube

Important Compatibility Notice

This product is precut for a typical 54" mineral-tank configuration. Tank domes, lower distributors, control valves, and distributor-pilot depths can vary. Confirm the required finished tube height for the complete system before final assembly.

An incorrectly sized, damaged, or poorly sealed distributor tube can allow untreated-water bypass, cause improper system operation, or contribute to media loss.